Wallet - ZKsync SDK Docs

The Wallet module provides functionalities for integrating, creating, and managing wallets within the ZKsync ecosystem.

`approveERC20`

Bridging ERC20 tokens from Ethereum requires approving the tokens to the ZKsync Ethereum smart contract.

Inputs

Parameter	Type	Description
`token`	`Address`	The Ethereum address of the token.
`amount`	`BigNumberish`	The amount of the token to be approved.
`overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async approveERC20(
  token: Address,
  amount: BigNumberish,
  overrides?: ethers.Overrides & { bridgeAddress?: Address }
): Promise<ethers.TransactionResponse>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x56E69Fa1BB0d1402c89E3A4E3417882DeA6B14Be";
const txHandle = await wallet.approveERC20(tokenL1, "10000000");

await txHandle.wait();

The claimFailedDeposit method withdraws funds from the initiated deposit, which failed when finalizing on L2. If the deposit L2 transaction has failed, it sends an L1 transaction calling claimFailedDeposit method of the L1 bridge, which results in returning L1 tokens back to the depositor, otherwise throws the error.

Inputs

Parameter	Type	Description
depositHash	`bytes32`	The L2 transaction hash of the failed deposit.

async claimFailedDeposit(depositHash: BytesLike): Promise<ethers.ContractTransaction>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const FAILED_DEPOSIT_HASH = "<FAILED_DEPOSIT_TX_HASH>";
const claimFailedDepositHandle = await wallet.claimFailedDeposit(FAILED_DEPOSIT_HASH);

`connect`

To interact with the ZKsync network, the Wallet object should be connected to a Provider by either passing it to the constructor or with the connect method.

Inputs

Parameter	Type	Description
`provider`	`Provider`	A ZKsync node provider.

Wallet.connect(provider:Provider): Wallet

Example

import { Wallet, Provider, types } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const unconnectedWallet = new Wallet(PRIVATE_KEY);

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = unconnectedWallet.connect(provider);

It is possible to chain connect and connectToL1 methods:

const wallet = unconnectedWallet.connect(zkSyncProvider).connectToL1(ethProvider);

`connectToL1`

To perform L1 operations, the Wallet object needs to be connected to an ethers.Provider object.

Inputs

Parameter	Type	Description
`provider`	`ethers.Provider`	An Ethereum node provider.

Wallet.connectToL1(provider: ethers.Provider): Wallet

Example

import { Wallet } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const unconnectedWallet = new Wallet(PRIVATE_KEY);

const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = unconnectedWallet.connectToL1(ethProvider);

It is possible to chain connect and connectToL1 methods:

const wallet = unconnectedWallet.connect(zkSyncProvider).connectToL1(ethProvider);

`constructor`

Inputs

Parameter	Type	Description
`privateKey`	`string` or `ethers.SigningKey`	The private key of the Ethereum account.
`providerL2?`	`Provider`	A ZKsync node provider. Needed for interaction with ZKsync.
`providerL1?`	`ethers.Provider`	An Ethereum node provider. Needed for interaction with L1.

constructor(privateKey: string | ethers.SigningKey, providerL2?: Provider, providerL1?: ethers.Provider)

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

For development and testing, it is recommended to use burner wallets. Avoid using real private keys to prevent security risks.

`deposit`

Transfers the specified token from the associated account on the L1 network to the target account on the L2 network. The token can be either ETH or any ERC20 token. For ERC20 tokens, enough approved tokens must be associated with the specified L1 bridge (default one or the one defined in transaction.bridgeAddress). In this case, depending on is the chain ETH-based or not transaction.approveERC20 or transaction.approveBaseERC20 can be enabled to perform token approval. If there are already enough approved tokens for the L1 bridge, token approval will be skipped. To check the amount of approved tokens for a specific bridge, use the allowanceL1 method.

Inputs

Parameter	Type	Description
`transaction.token`	`Address`	The address of the token to deposit. `ETH` by default.
`transaction.amount`	`BigNumberish`	The amount of the token to deposit.
`transaction.to?`	`Address`	The address that will receive the deposited tokens on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.bridgeAddress?`	`Address`	The address of the bridge contract to be used. Defaults to the default ZKsync bridge (either `L1EthBridge` or `L1Erc20Bridge`).
`transaction.approveERC20?`	`boolean`	Whether or not should the token approval be performed under the hood. Set this flag to `true` if you bridge an ERC20 token and didn't call the `approveERC20` function beforehand.
`transaction.approveBaseERC20?`	`boolean`	Whether or not should the base token approval be performed under the hood. Set this flag to `true` if you bridge a base token and didn't call the `approveERC20` function beforehand.
`transaction.l2GasLimit?`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.gasPerPubdataByte?`	`BigNumberish`	Whether or not should the token approval be performed under the hood. Set this flag to `true` if you bridge an ERC20 token and didn't call the `approveERC20` function beforehand.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive l2Value.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.
`transaction.approveOverrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.
`transaction.approveBaseOverrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.
`transaction.customBridgeData?`	`BytesLike`	Additional data that can be sent to a bridge.

async deposit(transaction: {
  token: Address;
  amount: BigNumberish;
  to?: Address;
  operatorTip?: BigNumberish;
  bridgeAddress?: Address;
  approveERC20?: boolean;
  approveBaseERC20?: boolean;
  l2GasLimit?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  refundRecipient?: Address;
  overrides?: Overrides;
  approveOverrides?: Overrides;
  approveBaseOverrides?: Overrides;
  customBridgeData?: BytesLike;
}): Promise<PriorityOpResponse>

Example

Deposit ETH on ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const depositTx = await wallet.deposit({
  token: utils.ETH_ADDRESS,
  amount: 10_000_000n,
});
// Note that we wait not only for the L1 transaction to complete but also for it to be
// processed by ZKsync. If we want to wait only for the transaction to be processed on L1,
// we can use `await depositTx.waitL1Commit()`
await depositTx.wait();

Deposit token on ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x56E69Fa1BB0d1402c89E3A4E3417882DeA6B14Be";
const depositTx = await wallet.deposit({
  token: tokenL1,
  amount: 10_000_000n,
  approveERC20: true,
});
// Note that we wait not only for the L1 transaction to complete but also for it to be
// processed by ZKsync. If we want to wait only for the transaction to be processed on L1,
// we can use `await depositTx.waitL1Commit()`
await depositTx.wait();

Deposit ETH on non-ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const depositTx = await wallet.deposit({
  token: utils.ETH_ADDRESS,
  amount: 10_000_000n,
  approveBaseERC20: true,
});
// Note that we wait not only for the L1 transaction to complete but also for it to be
// processed by ZKsync. If we want to wait only for the transaction to be processed on L1,
// we can use `await depositTx.waitL1Commit()`
await depositTx.wait();

Deposit base token on non-ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const depositTx = await wallet.deposit({
  token: await wallet.getBaseToken(),
  amount: 10_000_000n,
  approveERC20: true, // or approveBaseERC20: true
});
// Note that we wait not only for the L1 transaction to complete but also for it to be
// processed by ZKsync. If we want to wait only for the transaction to be processed on L1,
// we can use `await depositTx.waitL1Commit()`
await depositTx.wait();

Deposit non-base token on non-ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x56E69Fa1BB0d1402c89E3A4E3417882DeA6B14Be";
const depositTx = await wallet.deposit({
  token: tokenL1,
  amount: 10_000_000n,
  approveERC20: true,
  approveBaseERC20: true,
});
// Note that we wait not only for the L1 transaction to complete but also for it to be
// processed by ZKsync. If we want to wait only for the transaction to be processed on L1,
// we can use `await depositTx.waitL1Commit()`
await depositTx.wait();

`estimateGasDeposit`

Estimates the amount of gas required for a deposit transaction on L1 network. Gas of approving ERC20 token is not included in estimation.

Inputs

Parameter	Type	Description
`transaction.token`	`Address`	The address of the token to deposit. `ETH` by default.
`transaction.amount`	`BigNumberish`	The amount of the token to deposit.
`transaction.to?`	`Address`	The address that will receive the deposited tokens on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.bridgeAddress?`	`Address`	The address of the bridge contract to be used. Defaults to the default ZKsync bridge (either `L1EthBridge` or `L1Erc20Bridge`).
`transaction.l2GasLimit?`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.gasPerPubdataByte?`	`BigNumberish`	Whether or not should the token approval be performed under the hood. Set this flag to `true` if you bridge an ERC20 token and didn't call the `approveERC20` function beforehand.
`transaction.customBridgeData?`	`BytesLike`	Additional data that can be sent to a bridge.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive l2Value.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async estimateGasDeposit(transaction:
  token: Address;
  amount: BigNumberish;
  to?: Address;
  operatorTip?: BigNumberish;
  bridgeAddress?: Address;
  customBridgeData?: BytesLike;
  l2GasLimit?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  refundRecipient?: Address;
  overrides?: ethers.Overrides;
 }): Promise<bigint>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x5C221E77624690fff6dd741493D735a17716c26B";
const gas = await wallet.estimateGasDeposit({
  token: tokenL1,
  amount: "10000000",
});
console.log(`Gas: ${gas}`);

`estimateGasRequestExecute`

Estimates the amount of gas required for a request execute transaction.

Inputs

Name	Type	Description
`transaction.contractAddress`	`Address`	The L2 contract to be called.
`transaction.calldata`	`BytesLike`	The input of the L2 transaction.
`transaction.l2GasLimit?`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.mintValue?`	`BigNumberish`	The amount of base token that needs to be minted on non-ETH-based L2..
`transaction.l2Value?`	`BigNumberish`	`msg.value` of L2 transaction.
`transaction.factoryDeps?`	`ethers.BytesLike[]`	An array of L2 bytecodes that will be marked as known on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.gasPerPubdataByte?`	`BigNumberish`	The L2 gas price for each published L1 calldata byte.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive `l2Value`.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

estimateGasRequestExecute(transaction: {
  contractAddress: Address;
  calldata: string;
  l2GasLimit?: BigNumberish;
  mintValue?: BigNumberish;
  l2Value?: BigNumberish;
  factoryDeps?: BytesLike[];
  operatorTip?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  refundRecipient?: Address;
  overrides?: Overrides;
}): Promise<bigint>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const CONTRACT_ADDRESS = "<CONTRACT_ADDRESS>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const gas = await wallet.estimateGasRequestExecute({
  contractAddress: await provider.getMainContractAddress(),
  calldata: "0x",
  l2Value: 7_000_000_000,
});
console.log(`Gas: ${gas}`);

`ethWallet`

You can get an ethers.Wallet object with the same private key with ethWallet() method.

ethWallet(): ethers.Wallet

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const ethWallet = wallet.ethWallet();

`finalizeWithdrawal`

Proves the inclusion of the L2 -> L1 withdrawal message.

Inputs

Name	Type	Description
`withdrawalHash`	`BytesLike`	Hash of the L2 transaction where the withdrawal was initiated.
`index?`	`number`	In case there were multiple withdrawals in one transaction, you may pass an index of the withdrawal you want to finalize. Defaults to 0.
`overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async finalizeWithdrawal(withdrawalHash: BytesLike, index: number = 0, overrides?: ethers.Overrides): Promise<ethers.ContractTransactionResponse>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const WITHDRAWAL_HASH = "<WITHDRAWAL_TX_HASH>";
const finalizeWithdrawHandle = await wallet.finalizeWithdrawal(WITHDRAWAL_HASH);

`finalizeWithdrawalParams`

Returns the parameters required for finalizing a withdrawal from the withdrawal transaction's log on the L1 network.

Inputs

Name	Type	Description
`withdrawalHash`	`BytesLike`	Hash of the L2 transaction where the withdrawal was initiated.
`index?`	`number`	In case there were multiple withdrawals in one transaction, you may pass an index of the withdrawal you want to finalize. Defaults to 0.

async finalizeWithdrawalParams(withdrawalHash: BytesLike, index: number = 0): Promise<FinalizeWithdrawalParams>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const WITHDRAWAL_HASH = "<WITHDRAWAL_TX_HASH>";
const params = await wallet.finalizeWithdrawalParams(WITHDRAWAL_HASH);

`fromEncryptedJson`

Creates a Wallet from encrypted json file using provided password.

Inputs

Parameter	Type	Description
`json`	`string`	Encrypted json file.
`password`	`string` or `Uint8Array`	Password for encrypted json file.
`callback?`	`ProgressCallback`	If callback is provided, it is called periodically during decryption so that any UI can be updated.

static async fromEncryptedJson(json: string, password: string | Uint8Array, callback? : ProgressCallback): Promise<Wallet>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import * as fs from "fs";

const wallet = await Wallet.fromEncryptedJson(fs.readFileSync("wallet.json", "utf8"), "password");

`fromEncryptedJsonSync`

Creates a Wallet from encrypted json file using provided password.

Inputs

Parameter	Type	Description
`json`	`string`	Encrypted json file.
`password`	`string` or `Uint8Array`	Password for encrypted json file.

static fromEncryptedJsonSync(json: string, password: string | Uint8Array): Wallet

Example

import { Wallet } from "zksync-ethers";
import * as fs from "fs";

const wallet = Wallet.fromEncryptedJsonSync(fs.readFileSync("tests/files/wallet.json", "utf8"), "password");

`fromMnemonic`

Creates a Wallet with the provider as L1 provider and a private key that is built from the mnemonic passphrase.

Inputs

Parameter	Type	Description
`mnemonic`	`string`	The mnemonic of the private key.
`provider?`	`ethers.Provider`	An Ethereum node provider. Needed for interaction with L1.

static fromMnemonic(mnemonic: string, provider?: ethers.Provider): Wallet

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const MNEMONIC = "stuff slice staff easily soup parent arm payment cotton hammer scatter struggle";

const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = Wallet.fromMnemonic(MNEMONIC, ethProvider);

`getAddress`

Returns the wallet address.

async getAddress(): Promise<Address>;

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Address: ${await wallet.getAddress()}`);

`getAllBalances`

Returns all balances for confirmed tokens given by an account address.

async getAllBalances(): Promise<BalancesMap>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const allBalances = await wallet.getAllBalances();

`getAllowanceL1`

Returns the amount of approved tokens for a specific L1 bridge.

Inputs

Parameter	Type	Description
`token`	`Address`	The Ethereum address of the token.
`bridgeAddress?`	`Address`	The address of the bridge contract to be used. Defaults to the default ZKsync bridge, either `L1EthBridge` or `L1Erc20Bridge`.
`blockTag?`	`BlockTag`	In which block an allowance should be checked on. `committed`, i.e. the latest processed one is the default option.

async getAllowanceL1(
  token: Address,
  bridgeAddress?: Address,
  blockTag?: ethers.BlockTag
): Promise<bigint>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x5C221E77624690fff6dd741493D735a17716c26B";
console.log(`Token allowance: ${await wallet.getAllowanceL1(tokenL1)}`);

`getBalance`

Returns the amount of the token the Wallet has.

Inputs

Parameter	Type	Description
`token?`	`Address`	The address of the token. ETH by default.
`blockTag`	`BlockTag`	In which block a balance should be checked on. `committed`, i.e. the latest processed one is the default option.

async getBalance(token?: Address, blockTag: BlockTag = 'committed'): Promise<bigint>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL2 = "0x6a4Fb925583F7D4dF82de62d98107468aE846FD1";

console.log(`Token balance: ${await wallet.getBalance(tokenL2)}`);

`getBalanceL1`

Returns the amount of the token the Wallet has on Ethereum.

Inputs

Parameter	Type	Description
`token?`	`Address`	The address of the token. ETH by default.
`blockTag?`	`BlockTag`	In which block a balance should be checked on. `committed`, i.e. the latest processed one is the default option.

async getBalanceL1(token?: Address, blockTag?: BlockTag): Promise<bigint>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x56E69Fa1BB0d1402c89E3A4E3417882DeA6B14Be";

console.log(`Token balance: ${await wallet.getBalanceL1(tokenL1)}`);

`getBaseCost`

Returns base cost for L2 transaction.

Inputs

Name	Type	Description
`params.gasLimit`	`BigNumberish`	The `gasLimit` for the L2 contract call.
`params.gasPerPubdataByte?`	`BigNumberish`	The L2 gas price for each published L1 calldata byte.
`params.gasPrice?`	`BigNumberish`	The L1 gas price of the L1 transaction that will send the request for an execute call.

async getBaseCost(params: {
  gasLimit: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  gasPrice?: BigNumberish;
}): Promise<BigNumber>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Base cost: ${await wallet.getBaseCost({ gasLimit: 100_000 })}`);

`getBaseToken`

Returns the address of the base token on L1.

async getBaseToken(): Promise<string>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Base token: ${await wallet.getBaseToken()}`);

`getBridgehubContract`

Returns Contract wrapper of the Bridgehub smart contract.

async getBridgehubContract(): Promise<IBridgehub>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const bridgehub = await wallet.getBridgehubContract();

`getDeploymentNonce`

Returns account's deployment nonce number.

async getDeploymentNonce(): Promise<bigint>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Nonce: ${await wallet.getDeploymentNonce()}`);

`getDepositAllowanceParams`

Returns the parameters for the approval token transaction based on the deposit token and amount. Some deposit transactions require multiple approvals. Existing allowance for the bridge is not checked; allowance is calculated solely based on the specified amount.

Inputs

Parameter	Type	Description
`token`	`Address`	The address of the token to deposit.
`amount`	`BigNumberish`	The amount of the token to deposit.

async getDepositAllowanceParams(
  token: Address,
  amount: BigNumberish
): Promise<
  {
    token: Address;
    allowance: BigNumberish;
  }[]
>

Example

Get allowance parameters for depositing token on ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const token = "<L1_TOKEN>";
const amount = 5;
const approveParams = await wallet.getDepositAllowanceParams(token, amount);

await (
   await wallet.approveERC20(
       approveParams[0].token,
       approveParams[0].allowance
   )
).wait();

Get allowance parameters for depositing ETH on non-ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const token = utils.LEGACY_ETH_ADDRESS;
const amount = 5;
const approveParams = await wallet.getDepositAllowanceParams(token, amount);

await (
  await wallet.approveERC20(
    approveParams[0].token,
    approveParams[0].allowance
  )
).wait();

Get allowance parameters for depositing base token on non-ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const token = await wallet.getBaseToken();
const amount = 5;
const approveParams = await wallet.getDepositAllowanceParams(token, amount);

await (
   await wallet.approveERC20(
       approveParams[0].token,
       approveParams[0].allowance
   )
).wait();

Get allowance parameters for depositing non-base token on non-ETH-based chain.

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const token = "<L1_TOKEN>";
const amount = 5;
const approveParams = await wallet.getDepositAllowanceParams(token, amount);

await (
   await wallet.approveERC20(
       approveParams[0].token,
       approveParams[0].allowance
   )
).wait();

await (
   await wallet.approveERC20(
       approveParams[1].token,
       approveParams[1].allowance
   )
).wait();

`getDepositTx`

Returns populated deposit transaction.

Inputs

Parameter	Type	Description
`transaction.token`	`Address`	The address of the token to deposit. `ETH` by default.
`transaction.amount`	`BigNumberish`	The amount of the token to deposit.
`transaction.to?`	`Address`	The address that will receive the deposited tokens on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.bridgeAddress?`	`Address`	The address of the bridge contract to be used. Defaults to the default ZKsync bridge (either `L1EthBridge` or `L1Erc20Bridge`).
`transaction.l2GasLimit?`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.gasPerPubdataByte?`	`BigNumberish`	Whether or not should the token approval be performed under the hood. Set this flag to `true` if you bridge an ERC20 token and didn't call the `approveERC20` function beforehand.
`transaction.customBridgeData?`	`BytesLike`	Additional data that can be sent to a bridge.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive l2Value.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async getDepositTx(transaction: {
  token: Address;
  amount: BigNumberish;
  to?: Address;
  operatorTip?: BigNumberish;
  bridgeAddress?: Address;
  l2GasLimit?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  customBridgeData?: BytesLike;
  refundRecipient?: Address;
  overrides?: ethers.Overrides;
}): Promise<any>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x56E69Fa1BB0d1402c89E3A4E3417882DeA6B14Be";
const tx = await wallet.getDepositTx({
  token: tokenL1,
  amount: "10000000",
});

`getFullRequiredDepositFee`

Retrieves the full needed ETH fee for the deposit. Returns the L1 fee and the L2 fee FullDepositFee.

Inputs

Parameter	Type	Description
`transaction.token`	`Address`	The address of the token to deposit. `ETH` by default.
`transaction.to?`	`Address`	The address that will receive the deposited tokens on L2.
`transaction.bridgeAddress?`	`Address`	The address of the bridge contract to be used. Defaults to the default ZKsync bridge (either `L1EthBridge` or `L1Erc20Bridge`).
`transaction.customBridgeData?`	`BytesLike`	Additional data that can be sent to a bridge.
`transaction.gasPerPubdataByte?`	`BigNumberish`	Whether or not should the token approval be performed under the hood. Set this flag to `true` if you bridge an ERC20 token and didn't call the `approveERC20` function beforehand.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async getFullRequiredDepositFee(transaction: {
  token: Address;
  to?: Address;
  bridgeAddress?: Address;
  customBridgeData?: BytesLike;
  gasPerPubdataByte?: BigNumberish;
  overrides?: ethers.Overrides;
}): Promise<FullDepositFee>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x56E69Fa1BB0d1402c89E3A4E3417882DeA6B14Be";
const fee = await wallet.getFullRequiredDepositFee({
  token: tokenL1,
  to: await wallet.getAddress(),
});
console.log(`Fee: ${fee}`);

`getL1BridgeContracts`

Returns L1 bridge contracts.

async getL1BridgeContracts(): Promise<{
  erc20: IL1ERC20Bridge;
  weth: IL1ERC20Bridge;
  shared: IL1SharedBridge;
}>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const l1BridgeContracts = await wallet.getL1BridgeContracts();

`getL2BridgeContracts`

Returns L2 bridge contracts.

async getL2BridgeContracts(): Promise<{
  erc20: IL2Bridge;
  weth: IL2Bridge;
  shared: IL2Bridge;
}>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const l2BridgeContracts = await wallet.getL2BridgeContracts();

`getMainContract`

Returns Contract wrapper of the ZKsync smart contract.

async getMainContract(): Promise<IZkSyncStateTransition>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Main contract: ${await wallet.getMainContract()}`);

`getNonce`

Returns account's nonce number.

Inputs

Parameter	Type	Description
`blockTag?`	`BlockTag`	In which block a balance should be checked on. `committed`, i.e. the latest processed one is the default option.

async getNonce(blockTag?: BlockTag): Promise<number>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Nonce: ${await wallet.getNonce()}`);

`getPriorityOpConfirmation`

Returns the transaction confirmation data that is part of L2->L1 message.

Inputs

Name	Type	Description
`txHash`	`BytesLike`	Hash of the L2 transaction where the withdrawal was initiated.
`index?`	`number`	In case there were multiple transactions in one message, you may pass an index of the transaction which confirmation data should be fetched. Defaults to 0.

async getPriorityOpConfirmation(txHash: string, index: number = 0): Promise<{
  l1BatchNumber: number;
  l2MessageIndex: number;
  l2TxNumberInBlock: number;
  proof: string[]
}>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

// Any L2 -> L1 transaction can be used.
// In this case, withdrawal transaction is used.
const tx = "0x2a1c6c74b184965c0cb015aae9ea134fd96215d2e4f4979cfec12563295f610e";
console.log(`Confirmation data: ${utils.toJSON(await wallet.getPriorityOpConfirmation(tx, 0))}`);

`getRequestExecuteAllowanceParams`

Returns the parameters for the approval token transaction based on the request execute transaction. Existing allowance for the bridge is not checked; allowance is calculated solely based on the specified transaction.

Inputs

Name	Type	Description
`transaction.contractAddress`	`Address`	The L2 contract to be called.
`transaction.calldata`	`BytesLike`	The input of the L2 transaction.
`transaction.l2GasLimit?`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.l2Value?`	`BigNumberish`	`msg.value` of L2 transaction.
`transaction.factoryDeps?`	`ethers.BytesLike[]`	An array of L2 bytecodes that will be marked as known on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.gasPerPubdataByte?`	`BigNumberish`	The L2 gas price for each published L1 calldata byte.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive `l2Value`.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async getRequestExecuteAllowanceParams(transaction: {
  contractAddress: Address;
  calldata: string;
  l2GasLimit?: BigNumberish;
  l2Value?: BigNumberish;
  factoryDeps?: BytesLike[];
  operatorTip?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  refundRecipient?: Address;
  overrides?: Overrides;
}): Promise<{token: Address; allowance: BigNumberish}>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tx = {
  contractAddress: await wallet.getAddress(),
  calldata: '0x',
  l2Value: 7_000_000_000,
};

const approveParams = await wallet.getRequestExecuteAllowanceParams(tx);
await (
  await wallet.approveERC20(
    approveParams.token,
    approveParams.allowance
  )
).wait();

`getRequestExecuteTx`

Returns populated request execute transaction.

Inputs

Name	Type	Description
`transaction.contractAddress`	`Address`	The L2 contract to be called.
`transaction.calldata`	`BytesLike`	The input of the L2 transaction.
`transaction.l2GasLimit`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.mintValue?`	`BigNumberish`	The amount of base token that needs to be minted on non-ETH-based L2..
`transaction.l2Value?`	`BigNumberish`	`msg.value` of L2 transaction.
`transaction.factoryDeps?`	`ethers.BytesLike[]`	An array of L2 bytecodes that will be marked as known on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.gasPerPubdataByte?`	`BigNumberish`	The L2 gas price for each published L1 calldata byte.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive `l2Value`.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async getRequestExecuteTx(transaction: {
  contractAddress: Address;
  calldata: string;
  l2GasLimit?: BigNumberish;
  mintValue?: BigNumberish;
  l2Value?: BigNumberish;
  factoryDeps?: BytesLike[];
  operatorTip?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  refundRecipient?: Address;
  overrides?: Overrides;
}): Promise<TransactionRequest>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const CONTRACT_ADDRESS = "<CONTRACT_ADDRESS>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tx = await wallet.getRequestExecuteTx({
  contractAddress: await provider.getMainContractAddress(),
  calldata: "0x",
  l2Value: 7_000_000_000,
});

`isETHBasedChain`

Returns whether the chain is ETH-based.

async isETHBasedChain(): Promise<boolean>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

console.log(`Is ETH-based chain: ${await wallet.isETHBasedChain()}`);

`isWithdrawalFinalized`

Returns whether the withdrawal transaction is finalized on the L1 network.

Inputs

Name	Type	Description
`withdrawalHash`	`BytesLike`	Hash of the L2 transaction where the withdrawal was initiated.
`index?`	`number`	In case there were multiple withdrawals in one transaction, you may pass an index of the withdrawal you want to finalize. Defaults to 0.

async isWithdrawalFinalized(withdrawalHash: BytesLike, index: number = 0): Promise<boolean>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const WITHDRAWAL_HASH = "<WITHDRAWAL_TX_HASH>";
const isFinalized = await wallet.isWithdrawalFinalized(WITHDRAWAL_HASH);

`l2TokenAddress`

Returns the L2 token address equivalent for a L1 token address as they are not equal. ETH's address is set to zero address.

Only works for tokens bridged on default ZKsync Era bridges.

Inputs

Parameter	Type	Description
`token`	`Address`	The address of the token on L1.

async l2TokenAddress(token: Address): Promise<string>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tokenL1 = "0x5C221E77624690fff6dd741493D735a17716c26B";

console.log(`Token L2 address: ${await wallet.l2TokenAddress(tokenL1)}`);

`populateTransaction`

Designed for users who prefer a simplified approach by providing only the necessary data to create a valid transaction. The only required fields are transaction.to and either transaction.data or transaction.value (or both, if the method is payable). Any other fields that are not set will be prepared by this method.

Parameter	Type	Description
`transaction`	`TransactionRequest`	Transaction request.

async populateTransaction(transaction: TransactionRequest): Promise<TransactionLike>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const recipient = Wallet.createRandom();

const tx = wallet.populateTransaction({
  to: recipient.address,
  amount: ethers.parseEther("0.01"),
});

`requestExecute`

Request execution of L2 transaction from L1.

Inputs

Name	Type	Description
`transaction.contractAddress`	`Address`	The L2 contract to be called.
`transaction.calldata`	`BytesLike`	The input of the L2 transaction.
`transaction.l2GasLimit?`	`BigNumberish`	Maximum amount of L2 gas that transaction can consume during execution on L2.
`transaction.mintValue?`	`BigNumberish`	The amount of base token that needs to be minted on non-ETH-based L2..
`transaction.l2Value?`	`BigNumberish`	`msg.value` of L2 transaction.
`transaction.factoryDeps?`	`ethers.BytesLike[]`	An array of L2 bytecodes that will be marked as known on L2.
`transaction.operatorTip?`	`BigNumberish`	(currently is not used) If the ETH value passed with the transaction is not explicitly stated in the overrides, this field will be equal to the tip the operator will receive on top of the base cost of the transaction.
`transaction.gasPerPubdataByte?`	`BigNumberish`	The L2 gas price for each published L1 calldata byte.
`transaction.refundRecipient?`	`Address`	The address on L2 that will receive the refund for the transaction. If the transaction fails, it will also be the address to receive `l2Value`.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L1 `gasLimit`, `gasPrice`, `value`, etc.

async requestExecute(transaction: {
  contractAddress: Address;
  calldata: string;
  l2GasLimit?: BigNumberish;
  mintValue?: BigNumberish;
  l2Value?: BigNumberish;
  factoryDeps?: BytesLike[];
  operatorTip?: BigNumberish;
  gasPerPubdataByte?: BigNumberish;
  refundRecipient?: Address;
  overrides?: Overrides;
}): Promise<PriorityOpResponse>

Example

import { Wallet, Provider, types, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const CONTRACT_ADDRESS = "<CONTRACT_ADDRESS>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider, ethProvider);

const tx = await wallet.requestExecute({
  contractAddress: await provider.getMainContractAddress(),
  calldata: "0x",
  l2Value: 7_000_000_000,
});
await tx.wait();

`sendTransaction`

Broadcast the transaction to the network. Throws an error when tx.from is mismatched from the private key.

Inputs

Parameter	Type	Description
`tx`	`TransactionRequest`	Transaction request.

async sendTransaction(tx: TransactionRequest): Promise<TransactionResponse>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider);

const recipient = Wallet.createRandom();

const tx = await wallet.sendTransaction({
  type: utils.EIP712_TX_TYPE,
  to: recipient.address,
  value: ethers.parseEther("1"),
});

`signTransaction`

Signs the transaction and serializes it to be ready to be broadcast to the network. Throws an error when transaction.from is mismatched from the private key.

Inputs

Parameter	Type	Description
`transaction`	`TransactionRequest`	Transaction request.

async signTransaction(transaction: TransactionRequest): Promise<string>

Example

import { Wallet, Provider, utils } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const ethProvider = ethers.getDefaultProvider("sepolia");
const wallet = new Wallet(PRIVATE_KEY, provider);

const recipient = Wallet.createRandom();

const tx = await wallet.signTransaction({
  type: utils.EIP712_TX_TYPE,
  to: recipient.address,
  value: ethers.parseEther("1"),
});

`transfer`

For convenience, the Wallet class has transfer method, which can transfer ETH or any ERC20 token within the same interface.

Inputs

Parameter	Type	Description
`transaction.to`	`Address`	The address of the recipient.
`transaction.amount`	`BigNumberish`	The amount of the token to transfer.
`transaction.token?`	`Address`	The address of the token. `ETH` by default.
`transaction.paymasterParams?`	`PaymasterParams`	Paymaster parameters.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L2 `gasLimit`, `gasPrice`, `value`, etc.

async transfer(transaction: {
  to: Address;
  amount: BigNumberish;
  token?: Address;
  paymasterParams?: PaymasterParams;
  overrides?: ethers.Overrides;
}): Promise<TransactionResponse>

Examples

Transfer ETH.

import { Wallet, Provider, utils } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const recipient = Wallet.createRandom();

const transferTx = await wallet.transfer({
  to: recipient.address,
  amount: ethers.parseEther("0.01"),
});

const receipt = await transferTx.wait();

console.log(`The sum of ${receipt.value} ETH was transferred to ${receipt.to}`);

Transfer ETH using paymaster to facilitate fee payment with an ERC20 token.

import { Wallet, Provider, utils } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const token = "0x927488F48ffbc32112F1fF721759649A89721F8F"; // Crown token which can be minted for free
const paymaster = "0x13D0D8550769f59aa241a41897D4859c87f7Dd46"; // Paymaster for Crown token

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const recipient = Wallet.createRandom();

const transferTx = await wallet.transfer({
  to: Wallet.createRandom().address,
  amount: ethers.parseEther("0.01"),
  paymasterParams: utils.getPaymasterParams(paymaster, {
    type: "ApprovalBased",
    token: token,
    minimalAllowance: 1,
    innerInput: new Uint8Array(),
  }),
});

const receipt = await transferTx.wait();

console.log(`The sum of ${receipt.value} ETH was transferred to ${receipt.to}`);

Transfer token.

import { Wallet, Provider, types } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const tokenL2 = "0x6a4Fb925583F7D4dF82de62d98107468aE846FD1";
const transferTx = await wallet.transfer({
  token: tokenL2,
  to: Wallet.createRandom().address,
  amount: ethers.parseEther("0.01"),
});

const receipt = await transferTx.wait();

console.log(`The sum of ${receipt.value} token was transferred to ${receipt.to}`);

Transfer token using paymaster to facilitate fee payment with an ERC20 token.

import { Wallet, Provider, types } from "zksync-ethers";
import { ethers } from "ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const token = "0x927488F48ffbc32112F1fF721759649A89721F8F"; // Crown token which can be minted for free
const paymaster = "0x13D0D8550769f59aa241a41897D4859c87f7Dd46"; // Paymaster for Crown token

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const tokenL2 = "0x6a4Fb925583F7D4dF82de62d98107468aE846FD1";
const transferTx = await wallet.transfer({
  token: tokenL2,
  to: Wallet.createRandom().address,
  amount: ethers.parseEther("0.01"),
  paymasterParams: utils.getPaymasterParams(paymaster, {
    type: "ApprovalBased",
    token: token,
    minimalAllowance: 1,
    innerInput: new Uint8Array(),
  }),
});

const receipt = await transferTx.wait();

console.log(`The sum of ${receipt.value} token was transferred to ${receipt.to}`);

`withdraw`

Initiates the withdrawal process which withdraws ETH or any ERC20 token from the associated account on L2 network to the target account on L1 network.

Inputs

Parameter	Type	Description
`transaction.token`	`Address`	The address of the token. `ETH` by default.
`transaction.amount`	`BigNumberish`	The amount of the token to withdraw.
`transaction.to?`	`Address`	The address of the recipient on L1.
`transaction.bridgeAddress?`	`Address`	The address of the bridge contract to be used.
`transaction.paymasterParams?`	`PaymasterParams`	Paymaster parameters.
`transaction.overrides?`	`ethers.Overrides`	Transaction's overrides which may be used to pass L2 `gasLimit`, `gasPrice`, `value`, etc.

async withdraw(transaction: {
  token: Address;
  amount: BigNumberish;
  to?: Address;
  bridgeAddress?: Address;
  paymasterParams?: PaymasterParams;
  overrides?: ethers.Overrides;
}): Promise<TransactionResponse>

Examples

Withdraw ETH.

import { Wallet, Provider, types, utils } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const withdrawTx = await wallet.withdraw({
  token: utils.ETH_ADDRESS,
  amount: 10_000_000n,
});

Withdraw ETH using paymaster to facilitate fee payment with an ERC20 token.

import { Wallet, Provider, types, utils } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const token = "0x927488F48ffbc32112F1fF721759649A89721F8F"; // Crown token which can be minted for free
const paymaster = "0x13D0D8550769f59aa241a41897D4859c87f7Dd46"; // Paymaster for Crown token

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const withdrawTx = await wallet.withdraw({
  token: utils.ETH_ADDRESS,
  amount: 10_000_000n,
  paymasterParams: utils.getPaymasterParams(paymaster, {
    type: "ApprovalBased",
    token: token,
    minimalAllowance: 1,
    innerInput: new Uint8Array(),
  }),
});

Withdraw token.

import { Wallet, Provider, types } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const tokenL2 = "0x6a4Fb925583F7D4dF82de62d98107468aE846FD1";
const withdrawTx = await wallet.withdraw({
  token: tokenL2,
  amount: 10_000_000,
});

Withdraw token using paymaster to facilitate fee payment with an ERC20 token.

import { Wallet, Provider, types, utils } from "zksync-ethers";

const PRIVATE_KEY = "<WALLET_PRIVATE_KEY>";
const token = "0x927488F48ffbc32112F1fF721759649A89721F8F"; // Crown token which can be minted for free
const paymaster = "0x13D0D8550769f59aa241a41897D4859c87f7Dd46"; // Paymaster for Crown token

const provider = Provider.getDefaultProvider(types.Network.Sepolia);
const wallet = new Wallet(PRIVATE_KEY, provider);

const tokenL2 = "0x6a4Fb925583F7D4dF82de62d98107468aE846FD1";
const withdrawTx = await wallet.withdraw({
  token: tokenL2,
  amount: 10_000_000,
  paymasterParams: utils.getPaymasterParams(paymaster, {
    type: "ApprovalBased",
    token: token,
    minimalAllowance: 1,
    innerInput: new Uint8Array(),
  }),
});

Introduction

Manage accounts and sign transactions in zksync-ethers.

Signer

Signer object and its usage in ZKsync.